Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Текущий номер
29 | 03 | 2024
2017, 08 август (August)

DOI: 10.14489/td.2017.08.pp.052-058

Коновалов А. М., Кугушев В. И., Яковлев А. Ю.
ДВА ПЕРСПЕКТИВНЫХ НАПРАВЛЕНИЯ ДЛЯ ДЕФЕКТОСКОПИИ ТРЕЩИН С ИСПОЛЬЗОВАНИЕМ СОБСТВЕННЫХ КОЛЕБАНИЙ ОБЪЕКТА КОНТРОЛЯ
(c. 52-58)

Аннотация. Представлен метод дефектоскопии трещин с использованием собственных колебаний объекта контроля. На примере двух объектов показана универсальность предлагаемого метода. Для первого объекта использование собственных колебаний является практически безальтернативным методом. Для второго объекта эффективность применения собственных колебаний состоит в том, что позволяет быстро и просто провести экспресс-контроль в условиях эксплуатации, что невозможно сделать другими методами неразрушающего контроля.

Ключевые слова:  собственные колебания, частота, трещины, удар, диапазоны, экспресс-контроль.

 

Konovalov A. M., Kugushev V. I., Yakovlev A. Yu.
TWO PROMISING TRENDS FOR FLAW DETECTION OF CRACKS USING SELF-OSCILLATIONS OF THE OBJECT UNDER TEST
(pp. 52-58)

Abstract. A simple and rapid method of flaw detection of cracks is presented using self-oscillations of the object under test. A generality of the proposed method is demonstrated through experimental investigation of two different objects. The first object is an injector head. The state of its inner jacket which is operated under high temperatures and which is not accessible from outside due to a cooling system requires monitoring. Disassembling of the injector head when in idle condition in the process of operation is excluded. The following physical process forms the basis of the proposed method. During excitation of the injector head self-oscillations presence of cracks on the inner jacket in the process of deformation will contribute to conversion of mechanical energy of oscillations to thermal energy, i.e. to inner energy increase. The conversion results from the action of two factors, when the crack edges are shifted, its walls would rub against each other in the course of oscillations, also yielding of metal in the angles of the crack would happen. Any body tends to have minimum of internal energy. Therefore, if cracks are available the modes of self-oscillations of the injector head, which contribute to increase of internal energy in the process of deformation, will be damped by cracks. The energy received by the body in the result of external excitation of self-oscillations will be redistributed onto other modes of oscillations whose deformation impacts the cracks the least. Implementation of this method consists in plotting of a restricted spectrum of self-oscillations for a normal injector head which would consist of a number of specially selected modes of self-oscillations and frequency ranges within which they should be measured. Self-oscillations were excited by slight taps with a hammer to certain points, self-oscillations were measured by frequency meter. The indicator of cracks is the situation when any selected mode of self-oscillations replaces other selected modes and can be persistently measured in their ranges. The second object is the railway wheels. Use of this method provides their quick and simple express-control while the railroad trains are in idle condition at the train stations, which is not possible by using any other methods of non-destructive testing.

Keywords: self-oscillations, frequency, cracks, tap, ranges, express-control.

Рус

А. М. Коновалов, В. И. Кугушев, А. Ю. Яковлев (АО «ЦКБ МТ «Рубин», Санкт-Петербург, Россия) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

Eng

A. M. Konovalov, V. I. Kugushev, A. Yu. Yakovlev (JSC “CDB ME “Rubin”, Saint-Petersburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

Рус

1. Микляев П. Г., Нешпор Г. С., Кудряшов В. Г. Кинетика разрушения. М.: Металлургия, 1979. 279 с.
2. Хажинский Г. М. Модели деформирования и разрушения металлов. М.: Научный мир, 2011. 231 с.
3. Трофимова Т. И. Основы физики. Молекулярная физика. Термодинамика: учеб. пособие. М.: КНОРУС, 2011. 192 с.
4. Броек Д. Основы механики разрушения: пер. с англ. М.: Высш. шк., 1980. 368 с.
5. Гольденблат И. И. Нелинейные проблемы теории упругости. М.: Наука, 1969. 336 с.
6. Тиль Р. Электрические измерения неэлектрических величин: пер. с нем. М.: Энергоатомиздат, 1987. 192 с.
7. Кугушев В. И. Метод экспрессконтроля железнодорожных колес // Дефектоскопия. 2012. № 6. С. 22 – 29.

Eng

1. Mikliaev P. G., Neshpor G. S., Kudriashov V. G. (1979). Kinetics of destruction. Moscow: Metallurgiia. [in Russian language]
2. Khazhinskii G. M. (2011). Models of deformation and fracture of metals. Moscow: Nauchnyi mir. [in Russian language]
3. Trofimova T. I. (2011). Fundamentals of physics. Molecular physics. Thermodynamics: textbook. Moscow: KNORUS. [in Russian language]
4. Broek D. (1980). Fundamentals of fracture mechanics. Moscow: Vysshaia shkola. [in Russian language]
5. Gol'denblat I. I. (1969). Nonlinear problems of the elasticity theory. Moscow: Nauka. [in Russian language]
6. Til' R. (1987). Electrical measurements of nonelectrical quantities. Moscow: Energoatomizdat. [in Russian language]
7. Kugushev V. I. (2012). A method for proximate testing of railroad wheels. Defektoskopiia, (6), pp. 22-29. [in Russian language]

Рус

Статью можно приобрести в электронном виде (PDF формат).

Стоимость статьи 350 руб. (в том числе НДС 18%). После оформления заказа, в течение нескольких дней, на указанный вами e-mail придут счет и квитанция для оплаты в банке.

После поступления денег на счет издательства, вам будет выслан электронный вариант статьи.

Для заказа статьи заполните форму:

Форма заказа статьи



Дополнительно для юридических лиц:


Type the characters you see in the picture below



.

Eng

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 

 

 

.

.

 

 
Поиск
На сайте?
Сейчас на сайте находятся:
 19 гостей на сайте
Опросы
Понравился Вам сайт журнала?
 
Баннер
Rambler's Top100 Яндекс цитирования