Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Archive
05 | 10 | 2022
2019, 05 May

DOI: 10.14489/td.2019.05.pp.052-059

 

Mokritskii B. Ya.
TO THE QUESTION ABOUT THE CONTROL SURFACES, FORMED ON A CNC MACHINE
(с. 52-59)

Abstract. Investigated the quality of the surfaces obtained on the CNC machine model HBS-1319V. Used in the actual production situation of the company "Technopark" at school. The model of the band saw machine, the types of saws used on it, the brands of materials used are accepted as the initial data of the current production. The problem of quality management (through surface roughness and other parameters) of formed surfaces of blanks by developing technical and organizational solutions aimed at reducing the size of allowances for subsequent finishing of the workpiece is considered. This task is also relevant to perform dimensional grooves in the workpiece. Analysis of the problem showed that the issues of metrological support for the operations of procurement industries of machine-building enterprises are not raised. There is no methodological and instrument base for this stage of production. This also applies to the blank production with band saw machines. Results of control of surfaces depending on conditions of their reception and depending on the used means of control are resulted.

Keywords: measurement, control of deviations, the surface after sawing.

B. Ya. Mokritskii (Federal State-Financed Educational Institution of Higher Learning “Komsomolsk-na-Amure State University”, Komsomolsk-na-Amure, Russia)  E-mail:  Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

 

 

1. Litvinov A. Е. Kornienko V. G., Suhonosov N. I. (2010). Study of cutting conditions on band saws. Stanki Instrument (STIN), (10), pp. 5-8. [in Russian language]
2. Milberg D. (1986). Cutting force when sawing with band saws. Industrie-Anzelger, 79, pp. 35-36. [in Russian language]
3. Litvinov A. Е. Kornienko V. G., Suhonosov N. I. (2007). Research of band saw technological parameters. Sovremennye naukoemkie tekhnologii, (6), pp. 47-48. [in Russian language]
4. Litvinov A. Е. Kornienko V. G. (2009). The main modes of cutting and justification of the choice of the step of band saws when processing material on a band saw machine. Uspekhi sovremennogo estestvoznaniya, (8), pp. 89- 90. [in Russian language]
5. Litvinov A., Kornienko V. (2010). Research of deterioration and productivity of a band saw. European journal of natural history, (1).
6. Mokritskiy B. Ya., Usova T. N., Mokritskaya Е. B., Еrshova T. B. (2018). Comparative measurement of defects by video measuring machines of various manufacturers. Kontrol'. Diagnostika, (4), pp. 46-50. [in Russian language] DOI: 10.14489/td.2018.04.pp.046-049
7. Chirikov A. P. (2018). Innovation-oriented development of the metrological infrastructure in the new technological order. Moscow. [in Russian language]

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2019.05.pp.052-059

and fill out the  form  

 

 

 
Search
Баннер
Баннер
Конкурс дефектоскописта
Rambler's Top100 Яндекс цитирования