10.14489/td.2025.05.pp.044-055

2025, 05 May

DOI: 10.14489/td.2025.05.pp.044-055

Trishkina I. A., Fedosov D. A., Storozheva E. I.
INVESTIGATION OF TANTALUM AFTER EXPLOITATION IN CHLORINE-CONTAINING ENVIRONMENTS
(pp. 44-55)

Abstract. The results of the study of the composition, structure and mechanical properties of tantalum after operation for 6 years in a chlorine-containing environment of the chemical industry are presented. It is concluded that tantalum has sufficient corrosion resistance, static and cyclic strength, high ductility and toughness. The results of the metal examination of the injection device (nozzle) showed that the damage to the tantalum pipes was caused by overheating of the metal. Using energy dispersion analysis (EDA), the change in the chemical composition of tantalum along the wall thickness of the pipe after operation was investigated. It was found that during overheating, an increase in the oxygen content in the metal under study to 5…8 % (atomic) / 0,56…0,82 % (weight) resulted in an increase in hardness by 4.4 times, microhardness by 4.7 times, and a decrease in impact performance by 9.8 times. As a result of serial tests, a non-monotonic dependence of the impact operation on the overheating temperature was obtained, due to the course of two mutually opposite processes ‒ an increase in viscosity due to the thermal activation of deformation processes and a decrease in viscosity as a result of the interaction of tantalum with oxygen. The mechanisms of tantalum destruction have been studied by modeling thermal and mechanical effects using electronic fractography. By comparing the ratio of fracture elements obtained during operation and during modeling of temperature and force effects in laboratory conditions, it was found that the destruction of tantalum occurred from shock load after overheating to a temperature close to 1000 °C. The experimental material obtained by modeling the effect of operation parameters on tantalum pipes can be used in the diagnosis of elements of technical devices made of tantalum, as well as determining the causes of their damage.

Keywords: tantalum, longterm operation, corrosion resistance, mechanical properties, destruction mechanisms.

+ - About the Authors Click to collapse

I. A. Trishkina, D. A. Fedosov, E. I. Storozheva (All-Russian Scientific Research and Design and Technological Institute of Equipment of the Oil Refining and Oil Chemical Industry, Volgograd, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Batrakov V. V., Batrakov V. P., Pivovarova L. N., Sobol' V. V. (1990). Corrosion of structural materials. Gases and inorganic acids: handbook: in 2 books. Book 1. Gases and freons. Moscow: Metallurgiya. [in Russian language]
2. Suhotin A. M., Labutin A. L. (1972). Corrosion and protection of chemical equipment: reference manual. Vol. 6. Production of chlorine and its inorganic compounds. Leningrad: Himiya. [in Russian language]
3. Batrakov V. V., Batrakov V. P., Povovarova L. N., Sobol' V. V. (1990). Corrosion of structural materials. Gases and inorganic acids: handbook: in 2 books. Book 2. Inorganic acids. Moscow: Metallurgiya. [in Russian language]
4. Filyand M. A., Semenova E. I. (1964). Properties of rare elements: handbook. Moscow: Metallurgiya. [in Russian language]
5. Larionov R. E., Maslennikov O. O. (2020). Research on improving the technology of producing tantalum ingots using the vacuum arc melting method. Molodoy uchenyy, 308(18), 32 ‒ 35. [in Russian language]
6. Anis'kin M. V., Ignatova O. N., Kaganova I. I. et al. (2010). Mechanical properties of tantalum with different microstructure under highspeed deformation. Fizicheskaya mekhanika, 13(4), 65 ‒ 71. [in Russian language]
7. Shilov V. A. (2024). Size dependence of electronic properties of tantalum nanoclusters. Yadernaya fizika i inzhiniring, 15(1), 98 ‒ 104. [in Russian language]
8. Shilov V. A., Bortko D. V., Borisyuk P. V., Vasil'ev O. S. (2023). Study of Electronic Properties of Tantalum Nanoclusters on Silicon. IX International Conference "Laser, Plasma Research and Technologies" (LaPlas-2023). Moscow: NIYaU MIFI. [in Russian language]
9. Shilov V. A., Bortko D. V., Balahnev K. M. et al. (2024). Evolution of Electronic Properties of Tantalum and Tantalum Oxide Nanoclusters of Different Sizes. X International Conference "Laser, Plasma Research and Technologies" (LaPlas-2024). Moscow: NIYAU MIFI. [in Russian language]
10. Safety Guide "Methodological recommendations on the procedure for conducting visual and measuring control": Approved by order of the Federal Service for Environmental, Technological and Nuclear Supervision (Rostekhnadzor) No. 8. (2024). Moscow. [in Russian language]
11. Zelikman A. N., Korshunov B. G., Elyutin A. V., Zaharov A. M. (1990). Niobium and tantalum. Moscow: Metallurgiya. [in Russian language]
12. Todt F. (1996). Corrosion and corrosion protection: trans. from German. Moscow: Himiya. [in Russian language]
13. Mal'tsev M. V. (1970). Metallography of industrial non-ferrous metals and alloys. Moscow: Metallurgiya. [in Russian language]
14. Karpachev D. G., Doron'kin E. D., Tsukerman S. A. et al. (1977). Refractory and rare metals and alloys. Moscow: Metallurgiya. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

DOI: 10.14489/td.2025.05.pp.044-055

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.