10.14489/td.2026.07.pp.004-009

2026, 07 July

DOI: 10.14489/td.2026.07.pp.004-009

Kinzhagulov I. Yu., Basova T. V., Lobastov M. M.
KEY FEATURES OF ACOUSTIC EMISSION PARAMETERS IN ADDITIVELY MANUFACTURED WELDED STRUCTURES
(pp. 4-9)

Abstract. This paper presents analysis results for acoustic emission (AE) parameters obtained during inspection of an additively manufactured component produced via selective laser sintering and direct laser deposition, which served as the test object. The study established that values for key AE parameters (signal amplitude, average energy, and total ring-down count) from additively manufactured components differ significantly from those of parts made using traditional technologies. This discrepancy is attributed to microstructural particularities: dislocation dynamics, porosity, and residual stresses. Interpretation reliability of AE data was confirmed by correlation with strain-gauge measurements and displacement monitoring of the test object’s structural elements. The absence of scientifically validated indicators and criteria for assessing the technical condition of additively manufactured parts based on AE results underscores the relevance of this research, particularly given the rapid adoption of additive technologies in critical sectors such as energy, transportation, and logistics.

Keywords: acoustic emission, welded structures, additive technologies, non-destructive testing, acoustic emission testing.

+ - About the Authors Click to collapse

I. Yu. Kinzhagulov (ITMO University, St. Petersburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
T. V. Basova (LLC “NTC “Etalon”, St. Petersburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
M. M. Lobastov (JSC “Design Bureau Aerospace Systems”, Dubna, Moscow Region, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Barat, V. A., Marchenkov, A. Yu., Ushanov, S. V., Lepsheev, E. A., Sviridov, G. B., Lavrik, N. V., & Elizarov, S. V. (2025). Detection of diffusion interlayers during static tension of combined welded joints of steel 20 and 12Kh18N10T by acoustic emission method. Defektoskopiya, (1), 14–26. [in Russian language].
2. Lobastov, M. M., Kuzivanov, D. O., Kinzhagulov, I. Yu., & Konyashova, K. A. (2024). Acoustic emission control of defect formation during additive manufacturing of metal products. Kontrol'. Diagnostika, 27(9), 36–45. [in Russian language].
3. Stepanova, L. N., Kabanov, S. I., Ramazanov, I. S., Lebedev, E. Yu., Kireenko, V. V., Vonsovsky, A. V., & Kinzhagulov, I. Yu. (2015). Acoustic emission testing of defects in multi-pass welding of large-sized structures. Defektoskopiya, (9), 20–27. [in Russian language].
4. Megid, W. A., Mejia, J., Modwel, R., & Hay, D. R. (2022). Monitoring welded joints of steel pressure vessels using acoustic emission: Case study. Transactions of the Indian Institute of Metals, 75(9), 2199–2209.
5. Barat, V., Marchenkov, A., Ivanov, V., et al. (2021). Empirical approach to defect detection probability by acoustic emission testing. Applied Sciences, 11(20), Article 9429.
6. Machikhin, A., Poroykov, A., Bardakov, V., Marchenkov, A., Zhgut, D., Sharikova, M., Barat, V., Meleshko, N., & Kren, A. (2022). Combined acoustic emission and digital image correlation for early detection and measurement of fatigue cracks in rails and train parts under dynamic loading. Sensors, 22(23), Article 9256.
7. Kovalevich, A. S., Kinzhagulov, I. Yu., Stepanova, K. A., & Kuzivanov, D. O. (2023). Experimental study of acoustic emission parameters during cyclic testing of additively manufactured metal products. Izvestiya vysshikh uchebnykh zavedenii. Priborostroenie, 66(2), 139–147. [in Russian language].

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

DOI: 10.14489/td.2026.07.pp.004-009

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.