Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Архив номеров
29 | 03 | 2024
2017, 12 декабрь (December)

DOI: 10.14489/td.2017.12.pp.010-017

Сясько В. А., Голубев С. С., Потапов А. И., Смирнова Н. И.
МЕТОДЫ И СРЕДСТВА ЭЛЕКТРОМАГНИТНОЙ ТОЛЩИНОМЕТРИИ ПОКРЫТИЙ МЕТАЛЛИЧЕСКИХ ИЗДЕЛИЙ
(c. 10-17)

Аннотация. Рассмотрены современные и перспективные методы электромагнитной толщинометрии защитных и функциональных покрытий металлических изделий, а также алгоритмы преобразования измерительной информации, обеспечивающие расширение функциональных возможностей при измерениях и подавление влияния электрофизических и геометрических мешающих параметров объектов контроля. Даны сравнительные характеристики методов по назначению и приведены технические характеристики ряда отечественных и импортных толщиномеров.

Ключевые слова:  покрытие, толщина, электромагнитный, толщиномер.

 

Syasko V. A., Golubev S. S., Potapov A. I., Smirnova N. I.
METHODS AND MEANS OF ELECTROMAGNETIC THICKNESS GAUGING OF COATINGS ON METALLIC PRODUCTS
(pp. 10-17)

Abstract. The features of the modern and perspective electromagnetic methods of non-destructive testing and also implemented on their basis of gages of thickness of protecting and functional coatings on the metal bases which are partitioned into six groups, depending on conductance and magnetic properties of structure the coating/base are considered In article. Explicitly the offered structures of measuring transducers on the basis of the modern single-crystal microcontrollers with developed architecture and also algorithms of obtaining primary information for magnetic-induction impulse and teddy-current frequency and phase methods of measurement are described. The detailed analysis of primary informative and hindering parameters determined by geometrical and electrophysical parameters of products and conditions of carrying out measurements for each of methods is made. The methods of suppression of their influence providing reduction of uncertainty of measurements in case of maintenance of electromagnetic coating thickness gauges in industrial conditions are offered hardware-software (including test). Offers on the choice of parameters and complete set oа devices depending on problems of measurement are given. The comparative review of production of the main foreign and domestic manufacturers of the feeler gages which have passed the state tests and included in the State register of gages is given.

Keywords: coating, thickness, electromagnetic, thickness gauge.

Рус

В. А. Сясько (ООО «Константа», Санкт-Петербург, Россия) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
С. С. Голубев (Федеральное агентство по техническому регулированию и метрологии (РОССТАНДАРТ), Москва, Россия) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
А. И. Потапов (Санкт-Петербургский горный университет, Санкт-Петербург, Россия) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
Н. И. Смирнова (ФГУП «ВНИИМ им. Д. И. Менделеева», Санкт-Петербург, Россия) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

 

Eng

V. A. Syasko (LLC Сonstanta, St. Petersburg, Russia) Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
S. S. Golubev (Federal Agency on Technical Regulating and Metrology, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
A. I. Potapov (Saint-Petersburg Mining University, St. Petersburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
N. I. Smirnova (D. I. Mendeleyev Institute for Metrology (VNIM), St. Peterburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

 

Рус

1. Соболев В. С., Шкарлет Ю. М. Накладные и экранные датчики. Новосибирск: Наука, 1967. 144 с.
2. Герасимов В. Г. Электромагнитный контроль однослойных и многослойных изделий. М.: Энергия, 1972. 160 с.
3. Неразрушающий контроль: справочник: в 8 т. / под ред. В. В. Клюева. Т. 6. Кн. 1. Магнитные методы контроля / В. В. Клюев, В. Ф. Мужицкий, Э. С. Горкунов, В. Е. Щербинин и др. М.: Машиностроение, 2006. 358 с.
4. Потапов А. И., Сясько В. А., Соломенчук П. В. и др. Электромагнитные и магнитные методы неразрушающего контроля материалов и изделий. Т. 1. Электромагнитные и магнитные методы контроля толщины покрытий и стенок изделий. СПб.: Нестористория, 2014. 480 с.
5. Потапов А. И., Сясько В. А., Ивкин А. Е., Сясько А. В. К вопросу о калибровке вихретоковых фазовых преобразователей на примере толщиномеров цинковых покрытий // Дефектоскопия. 2013. № 9. С. 17 – 22.
6. Potapov A. I., Syasko V. A., Ivkin A. E., Syasko A. V. On the Calibration of Eddy_Current Phase Transducers Based on the Example of Thickness Gages for Zinc Coatings // Russian Journal of Nondestructive Testing. 2013. V. 49. N 9. Р. 505 – 509.

Eng

1. Sobolev V. S., Shkarlet Iu. M. (1967). Overhead and screen sensors. Novosibirsk: Nauka. [in Russian language]
2. Gerasimov V. G. (1972). Electromagnetic testing of single-layer and multi-layer products. Moscow: Energiia. [in Russian language]
3. Klyuev V. V. (Ed.), Muzhitskii V. F., Gorkunov E. S., Shcherbinin V. E. (2006). Nondestructive testing: Handbook. In 8 volumes. Vol. 6. Book 1. Magnetic testing methods. 2nd Ed. (revised and supplemented). Moscow: Mashinostroenie. [in Russian language]
4. Potapov A. I., Sias'ko V. A., Solomenchuk P. V. et al. (2014). Electromagnetic and magnetic methods of non-destructive testing of materials and products. Vol. 1. Electrоmagnetic and magnetic methods for thickness of coatings and walls of products inspection. St. Petersburg: Nestoristoriia. [in Russian language]
5. Potapov A. I., Sias'ko V. A., Ivkin A. E., Sias'ko A. V. (2013). On the calibration of eddycurrent phase transducers based on the example of thickness gages for zinc coatings. Defektoskopiia, (9), pp. 17-22. [in Russian language]
6. Potapov A. I., Syasko V. A., Ivkin A. E., Syasko A. V. (2013). On the calibration of eddy_current phase transducers based on the example of thickness gages for zinc coatings. Russian Journal of Nondestructive Testing, 49(9), pp. 505-509.

Рус

Статью можно приобрести в электронном виде (PDF формат).

Стоимость статьи 350 руб. (в том числе НДС 18%). После оформления заказа, в течение нескольких дней, на указанный вами e-mail придут счет и квитанция для оплаты в банке.

После поступления денег на счет издательства, вам будет выслан электронный вариант статьи.

Для заказа статьи заполните форму:

Форма заказа статьи



Дополнительно для юридических лиц:


Type the characters you see in the picture below



.

Eng

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 

 

 

.

.

 

 
Поиск
На сайте?
Сейчас на сайте находятся:
 17 гостей на сайте
Опросы
Понравился Вам сайт журнала?
 
Баннер
Rambler's Top100 Яндекс цитирования