DOI: 10.14489/td.2015.01.pp.072-078

Можегова Ю. Н., Марихов И. Н.
ТОЧНОСТЬ АВТОМАТИЗИРОВАННОГО КОНТРОЛЯ ПАРАМЕТРОВ ПОРИСТОСТИ МАТЕРИАЛОВ ГАЗОДИНАМИЧЕСКИМ МЕТОДОМ
(с. 72-78)

Аннотация. Теоретически обоснован способ автоматизированного определения минимального размера пор материала. Разработано устройство контроля. Определена точность способа контроля минимального размера пор материалов.

Ключевые слова:  автоматизированный неразрушающий контроль, пористость,  газодинамический метод.

Mozhegova Yu.N., Marihov I.N.
THE ACCURACY OF THE AUTOMATED CONTROL THE MATERIALS POROSITY PARAMETERS BY GAS-DYNAMIC METHOD
(pp. 72-78)

Abstract. The article is devoted to the studying of the structure of porous materials. The article provides a theoretical justification of the method for automated determination of porosity of materials: diffusion coefficients, filtering, solubility, active porosity, gas permeability. Equations of gas dynamics: Darcy's equations, Fik's equations for steady and unsteady flows, Leybenzon's equations are used as the original equations. The device for automated non-destructive testing properties of porous materials based on measuring the differential pressure of the gas in the flow through the controlled material is offered for implementing of the developed method. In this article the design and principle of operation of the control device are described. Software is used to automate the process control. The accuracy of the control of the porosity of the materials of the gas-dynamic method is determined. The measurement error of active porosity, gas permeability coefficients, solubility, diffusion and filtration from the structure of materials, device settings, and the accuracy of their production using the method of linear errors were determined in the work. The calculation of the influence coefficients of the parameters of the measuring device and the structure of the porous material on the measurement error of the coefficients of permeability, solubility, diffusion and filtration, active porosity is described in the article. Conclusions on the conformity of the proposed method and control device requirements of production on the required accuracy are made.

Keywords: computerized non-damaging control, porosity, gas-dynamic method.

Рус

Статью можно приобрести в электронном виде (PDF формат).

Стоимость статьи 350 руб. (в том числе НДС 18%). После оформления заказа, в течение нескольких дней, на указанный вами e-mail придут счет и квитанция для оплаты в банке.

После поступления денег на счет издательства, вам будет выслан электронный вариант статьи.

Для заказа статьи заполните форму:

Форма заказа статьи Фамилия, имя, отчество * Ваш E-mail * Почтовый адрес с индексом * Контактный телефон * Дополнительно для юридических лиц: Название организации ИНН КПП Юридический адрес с индексом Комментарий к заявке Type the characters you see in the picture below

.

Eng

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article Your name * Your e-mail * Your post address with index * Your phone number: * Comments to your order Type the characters you see in the picture below

 

 

 

 

 

.

.